Qvis MINI-PTZ-23X-H, Руководство пользователя

Страница: 22 / 29

15
2.4.4.4 Tour
Move the cursor to highlight TOUR item and then click confirm button to go to set interface.

TOUR NO
：
This is to set the tour number. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.

TOUR SETTING: Move the cursor to the TOUR setting item and then click confirm button. You will see the
following interface:
Here you can add or remove the preset, and set the corresponding dwell time and call speed.

DWELL: This is to set the dwell time. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.

SPEED: Here you can set the speed value.
When you move the cursor to one tour number, you can use the left/right button to turn the page.
When you move the cursor to one tour number, please click the confirm button to set the tour. Please use
up/down button to set preset number, dwell time and speed. Use the left/right button to go to the next tour. Click
the confirm button to exit the setup. After you completed the setup, move the cursor to back button to go to the
previous interface.

DELETE TOUR
：
This is to delete a tour. Input tour number in TOUR NO and then move the cursor to
DELETE TOUR, click confirm button to delete.

CALL: This is to activate tour. Input tour number in tour NO and highlight CALL, click confirm button to
activate tour.

STOP: This is to terminate touring.

BACK: Go back to previous menu.

EXIT: Log out system menu.
TOUR NO
： ：
1
TOUR SETTING
DELETE TOUR
CALL
STOP
BACK EXIT
NO PRESET DWELL SPEED
01 000 005 013
02 000 005 013
03 000 005 013
… … … …
32 000 005 013
BACK EXIT