WWW.DUALSIG.COM
26
Main menu
Sub menu
Function
Management
tools
Hard disk
management
Set appointed hard disk as read-write disc, read-only disc
or redundant disc, clear data, resume date and so on
User management
Modify user, team or password. Add user or team. Delete
user or team.
Online user
Break the connection with the already login user. Lock
the account after break until booting up again.
TV adjust
Adjust TV upside, downside, nearside, starboard distance
Automatic maintenance
Set automatic reboot system and automatic deleting iles.
Restore
Resume setup state: common setup, code setup, record-
ing setup, alarm setup, network setup, network service,
preview playback, serial port setup, user management
Upgrade
Upgrade the device by USB port
Device Info
Show device video,audio and alarm ports
System
information
Hard disk information
Display hard disk capability and recording time
Code stream statistics
Display code stream information
Log information
Clear all log information according to the log video and time
Edition information
Display edition information
Shut down
Logout or reboot
4.2 Record
4.2.1 Record Coniguration
To set the recording parameters in the surveillance channel. The system is set
up for 24 hours consecutive recording in the irst startup. You can enter [main
menu]> [recording function]> [recording setup] to set.
Note
:There must be at least one read-write hard disk.(refer to chapter 4.5.1)
Picture 4.1 Record Conig
(
Channel
) Choose the corresponding channel number to set the channel. Choose
the all option to set every channel to the same.
(
Redundancy
) Choose the redundancy function option to implement the ile
double backup function. Double backup is writing the video iles to two hard
disks. When you do the double backup, make sure that there are two hard disks
installed. One is read-write disk and the other is redundant disk. (refer to 4.5.1)
(
Length
) Set the time length of each video ile. 60 minutes is the default value.
WWW.DUALSIG.COM
