Qvis APOHDSDI-VAN, Руководство пользователя

Страница: 12 / 18

© Copyright Qvis ®. All documentation rights reserved.
6
C. Slightly loosen the screw on the pressing slice. You can adjust the video rotation angle of the
module to somewhere between 0°
～
355°.
D. Adjust the turning ring of the pedestal; you can adjust the module pan rotation angle to somewhere
between
0°
～
355°
.
E. Put the enclosure back on after you have completed the setup.
With IR light Without IR light
Figure 3-4
Please note, the screws in the following figure are found on the optical adjustment component.
Please make sure the optical adjustment component is facing outward to make sure it is not
touching the X-Y-Z axis module. See Figure 3-5.
Figure 3-5
STEP 7
Put the dome cover back and then put the three inner hexagon screws into the holes of the device. Use the
inner hexagonal wrench to fasten these three screws tightly. See Figure 3-6.