Qventi Matador, Инструкция по эксплуатации, Страница: 25 / 44

There are 3 methods to add the device.
3-Blue tooth mode
1.Power on the indoor unit, no need to launch the air conditioner.
2.Click "+" in the upper right corner of the "Home" screen
or tap "Add device" on the room which has no device.
3.Tap the "Air conditioner(BT+Wi-Fi)" logo.
4.Make sure Blue tooth of your smart phone is available.
5.Tap in the upper right corner and choose "Bluetooth"
then follow the comments on the screen to reset the Wi-Fi module
then check "Confirm the blue tooth is reset" and tap"Next".
6.
Select one of the found device and tap " +"
7.
Input the password of the Wi-Fi which the same as your smart
phone connected, then tap "Next".
8.
You can see the percent rate of connecting process, at the same time
"PP","SA","AP" shining in turn on the indoor display.
"PP" means "Searching the router"
"SA" means "connected to the router"
"AP" means "connected to the server"
< Welcome Home
Set your home location for more
information
All Devices Living Room Master
...
Add Device
Home Me
Work office
<
No devices
Select 2.4 Ghz
Wi-Fi Network and
enter password
Next
Cancel
If your Wi-Fi is 5GHz, please set it to
bo 2.4GHz.Common router setting
method
2.4
GHz
5
GHz
*******
Password
Help
Select Device to Add
Next
Cancel
Air conditioner
WLAN Bluetooth Flashlight Sound
Auto-rotate Huawei Share Airplane
mode
Mobile data
Location Screenshot Screen
Recorder
<
Add Manually Auto Scan
Dehumidifier
Air Conditioner
(BT+Wi-Fi)
Fresh Air
Purifier
Split Air
Conditioner
Window Type
Air Conditioner
Portable Air
Conditioner
Security
Camera
Swimming
Pool H/P
AP Mode
Reset the device first.
Method1:When there is a DISPLAY key on the
remote control, press the DISPLAY key 6 times
in the time of 8 seconds; when there is no
DISPLAY key on the remote control, press the
ECO key 6 times in the time of 8 seconds until
the device beeps twice and the LCD screen
show
CF .
Next
Cancel
Confirm the device is reset.
Resetting Devices <
Method2:Press the General key 9 times in the
time of 8 seconds until the device beeps twice
and the LCD screen show
CF .
CF Mode
AP Mode
Bluetooth
Default
CF Mode
Reset the device first.
Method1:When there is a DISPLAY key on the
remote control, press the DISPLAY key 6 times
in the time of 8 seconds; when there is no
DISPLAY key on the remote control, press the
ECO key 6 times in the time of 8 seconds until
the device beeps twice and the LCD screen
show CF
.
Next
Cancel
Confirm the device is reset.
Resetting Devices <
Method2:Press the General key 9 times in the
time of 8 seconds until the device beeps twice
and the LCD screen show CF
.
Help
Bluetooth Search
The search process may take up to
two minutes. Please do not perform
any operations during this time.
Next
Cancel
Scanning nearby devices...
Add Device
<
Device added
successfully
Sample1
Living Ro...
Dining R...
Master Be... Second B...
Kitchen Study Ro...
Done
Rename the
device
Select the
location room
25
Add device