QuStream AAB6214, Техническое руководство

Страница: 10 / 25

I
NTEGRITY
600 – AES600 F
AMILY
Publication 81-9059-0632-0, Rev. A
June 2008
Proprietary Information of QuStream 3-3
Figure 3-1 Installing Rear Connector Panel
3.2.2 I
NSTALL
M
AIN
C
IRCUIT
B
OARD
Install main circuit board as follows:
1. Open front access door on the FRM-603 chassis frame.
2. Locate the empty card slot that mates to the rear connector panel installed in the previous step.
3. Align the top and bottom edges of the circuit board with the chassis card guides as shown in
Figure 3-2.
4. Hold the card ejector lever out (unlocked position) as shown when inserting the board.
5. Press the board into place to ensure solid connection with the mating connectors on the mid-plane
and rear connector panel.