5. ELECTRICAL CONNECTIONS
REMEMBER
-Turn off the power!
3.
Optional Wall Controls:
Wiring connections for optional wall control
are shown in Fig. 8a and 8b. Figure 8a
shows how to wire a fan wall control switch.
This controls the fan only. To separately
control an optional light kit using the light
kit pull chain, you would have to connect
the blue wire from the fan to the house
supply wire, before it goes to the wall
control. This is not an easy connection, and
we suggest you call a qualified electrician
to do it for you.
4.
Inside the ceiling junction box be sure
to spread the wires apart so that the black
and blue connections are on one side of
the outlet box and the white/white and
green/copper connections are on the other
side.
Use the wire nuts supplied with your fan
when making connections. Secure the
connectors with electrical tape and make
sure there are no loose connections or
wire strands.
1.
Spread the wires apart so that the black
and blue wires from the fan are on one side
of the mounting bracket and the white wire
and green ground wire are on the other side.
2.
(Fig. 8) Connect the BLACK building
supply wire to the BLACK and BLUE fan
wires. Connect the WHITE building neutral
wire to the WHITE fan neutral wire. Connect
the COPPER building ground wire to the
GREEN fan ground wire.
Use
ONLY
wall controls approved by
Quorum. Use of unapproved wall
controls will cause unacceptable
humming noise, and avoids the fan
warranty.
Fig. 8
Fig. 8a
Fig. 8b
Outlet box
Fan switch
on wall
Ceiling
WH
BLUE
BLK
WH
BLK
House
supply
wire
GROUND
GRN
Outlet box
Ceiling
WH
BLUE
BLUE
BLUE
BLK
WH
BLK
BLK
BLK
GROUND
GRN
Fan/light
switch
on wall
House
supply
wire
Outlet box
Ceiling
WH
BLUE
BLUE
BLUE
BLK
WH
BLK
BLK
BLK
BLK/WH
GROUND
GRN
Fan
Fan
Fan