WARNING -
Turn off the power!
1.
(Fig. 5) Remove the motor top housing
and metal washer by remove the six screws
with lock washers from the motor collar.
2.
(Fig. 6) Insert the blade through the slot
in motor housing. Align holes in blade and
motor, and secure the blade in place with
blade support plate and secure with 2 screws
with lock washer provided. Repeat process
with the other blades. Place the motor top
cover onto the top of the motor, secure by
tightening the 3 screws previously removed.
3.
If not already affixed to the hanger
bracket, place the rectangular rubber isolators
between the hanger bracket and outlet box.
Secure the hanger bracket to the outlet box
using the 2 long steel screws supplied with
the outlex box.
4.
Slide the downrod through the canopy and
canopy cover. Slide the yoke cover onto the
downrod (Fig. 7). Feed the wires and safety
cable from the fan motor through the
downrod assembly.
5.
(Fig. 8) Attach the downrod assembly
(downrod, yoke cover, canopy and canopy
cover) to the motor by sliding the downrod
into the yoke on top of the motor assembly.
Slide the set pin through the hole in the yoke,
downrod and secure it with the safety lock
clip. Tighten the set screws on yoke. The
yoke cover will lower down to conceal the
yoke. Feed the wires through the downrod
ball.
6.
Pass the 120-volt supply wires through the
center hole in the mounting bracket. Attach
the mounting bracket to the outlet box with
the screws and washers provided with the
outlet box. Securely tighten the two
mounting screws. (Fig. 9)
7.
Lift the fan motor
and place into the
hanger bracket, rotating the ball until the
groove engages the tab on the hanger bracket.
This locks the ball mount and fan motor,
preventing fan rotation during operation.
Secure the safety cable to the building
structure using safety cable screw and flat
washer. (Fig. 10)
4. HANGING YOUR FAN
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Downrod
assembly
Metal washer
Motor top cover
Screws
Yoke
Ceiling
canopy
Canopy
cover
Yoke cover
Metal washer
Motor top cover
Screws
Screws with
lock washer
Blade support
plate
Blades
Yoke
Downrod
Set screw
Yoke
Canopy
Set pin
Safety
lock clip
Yoke cover
Canopy cover
Fig. 9
UL Listed
Outlet box
Ceiling
mounting
bracket
Mounting screws
(Supplied with outlet box)
120V
Wires
Fig. 10
Downrod
Hanger bracket
safety
cable
