Model #96015-xx: 37.5 lbs
97215-xx: 44.6 lbs
Unpack your fan and check the contents. Do not discard the carton. If warranty
replacement or repair is ever necessary the fan should be returned in original packaging.
Remove all parts and hardware. Do not lay motor housing on its side - because the
decorative casing may shift. Check all visible screws, bolts and nuts for tightness.
Examine all parts. The following parts should be included:
CAUTION: DO NOT LIFT MOTOR ASSEMBLY BY THE OUTER RING.
LIFTING BY THE OUTER RING PORTION WILL LIKELY CAUSE DAMAGE.
2. UNPACKING YOUR FAN
1. Set of blades (15 pcs) (a)
2. Blade deco plates (15 pcs) (b)
3. Blade deco bars (15 pcs) (c)
4. Blade arms (5 pcs) (d)
5. Hanging bracket (e)
6. Canopy (f)
7. Canopy cover (g)
8. Downrod assembly (6") (h)
9. Yoke cover (i)
10. Fan motor assembly (j)
11. Control cup plate (k)
12. Control cup (l)
13. Wall transmitter incl. 2 mounting screws and 3 wire nuts (m)
14. 2 wall plates (white and almond), 1 face plate (almond), 2 sets
of mounting screws, and machine screws (n)
15. Battery (o)
16. Parts bags (p) containing:
Blade attachment hardwares (5 pcs)
Screw No. 1: Blade deco plate screws (5/32”x22mm) (31 pcs)
Screw No. 2: Blade deco bar screws (5/32”x8mm) (31 pcs)
Screw No. 3: Blade secure screws with fiber washers
(3/16"x7.5mm) (31 pcs)
Screw No. 4: Blade arm screws with lock washers
(1/4"x38mm) (6 pcs)
Screw No. 5: Blade arm screws with lock washers
(3/16"x15mm) (11 pcs)
Mounting hardware (3 wire nuts)
NOTE:
Some Quorum fan models will have slightly
different parts than what is shown here
depending upon the design you have chosen.
Basic installation procedures are similar for
all models.
IF YOU FIND THAT PARTS ARE MISSING. CONTACT YOUR DEALER FOR REPLACEMENT, OR CALL QUORUM DIRECTLY AND WE WILL MAIL REPLACEMENTS TO YOU IMMEDIATELY.
1.
To avoid possible electric shock,
turn
off the electricity
at the main fuse box or
circuit panel before you begin the fan
installation or before servicing the fan or
installing accessories.
2.
Read all instructions and safety
information carefully before installing
your fan and
save these instructions.
3.
Make sure all electrical connections
comply with local codes or ordinances as
well as the National Electrical Code. If
you are unfamiliar with electric wiring,
please use a qualified and licensed
electrician.
4.
Make sure you have a location
selected for your fan which allows clear
space for the blades to rotate, and at lease
seven (7) feet of clearance between the
floor and the fan blade tips.
5.
To reduce the risk of fire, electric
shock, or other personal injury, mount fan
only on an outlet box or supporting system
marked
acceptable for fan support of 50
lbs (22.7 kg) or less
and use mounting
screws provided with the outlet box. Most
outlet boxes commonly used for the support
of lighting fixtures are not acceptable for
fan support and may need to be replaced.
Consult a qualified electrician if in doubt.
6.
To reduce the risk of personal injury
use only approved hanging brackets and
screws supplied with the outlet box for
mounting to the outlet box.
7.
After installation is complete, check
that all connections are absolutely secure.
8.
Do not insert anything into the fan
blades while they are rotating.
9.
To operate the reverse function on the
fan, press the reverse button on the wall
transmitter while the fan is running.
10.
Do not attempt to control the
operation of the fan (or an optional light
kit) from any wall control that is not
approved by Quorum for use with its fans.
Do not use solid state wall controls. The
use of any unapproved control voids the
fan's warranty.
1. SAFETY RULES
TOOLS REQUIRED
FOR INSTALLAITON
Phillips Screwdriver
Wire Cutters
Electrical Tape
Step Ladder
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
m.
n.
o.
p.
