The operation of the Quooker PRO3
The Quooker system consists of a vacuum-insulated tank, which is connected to
the cold water supply under the sink and to the Nordic single tap, the Fusion
tap or the Flex tap. Both boiling water and mixed water can be drawn off from
the Fusion and Flex tap.
Inside the tank the water is heated electrically to approx. 110°C and is kept at
this temperature. The Quooker PRO3 has a capacity of 3 litres. Before the water
leaves the tank it is purified by the HiTAC
®
water filter.
The Nordic single tap, the Fusion tap and the Flex tap are fitted with a child-
proof push-and-turn handle (see ‘Tips for use‘), which is clearly recognisable by
its industrial ribbing. The Nordic single tap is height adjustable
to guarantee safe use. Both the Nordic single tap, the Fusion tap and the Flex
tap are well insulated.
Despite all the safety features incorporated in the product, anyone using the
Quooker system must keep in mind the risks of using boiling water in general.
Incorrect use can lead to injury. Therefore always read the manual carefully
before use.
Installation, maintenance and warranty
Installing the Quooker requires connections to the water supply pipe and the
electrical system. The Quooker is supplied with a handy connection kit
(including the required Quooker inlet valve) for simple installation. For optimally
purified Quooker water, we recommend changing the HiTAC
®
filter cartridge
every 5 years. If necessary, the tank can be descaled. In areas with hard water
this should be performed more regularly.
You must not connect the Quooker to a deionised water device or to a water
softener that reduces the pH value.
The warranty period is two years, according to our General Terms of Business.
Introduction
