Quonset Microwave QM1004-8-12-100 Скачать руководство пользователя | Manualshive

Страница: 4 / 91

background image

QM1004-8-12-100 Combined RF Upconverter/Downconverter

User Manual

Personal Safety Considerations

This is a Safety Class I product (provided with a protective earthing ground incorporated in the power
cord). The mains plug shall only be inserted in a socket outlet provided with a protective earth contact.
Any interruption of the protective conductor, inside or outside the product, is likely to make the product
dangerous. Intentional interruption is prohibited. If this product is not used as specified, the protection
provided by the equipment could be impaired. This product must be used in a normal condition (in which
all means of protection are intact) only.

No operator serviceable parts inside. Refer servicing to qualified personnel. To prevent electrical shock,
do not remove covers. For continued protection against fire hazard, replace the line fuse(s) only with
fuses of the same type and rating (for example, normal blow, time delay, etc.). The use of other fuses or
material is prohibited.

General Safety Information

The following general safety precautions must be observed during all phases of operation of this prod-
uct. Failure to comply with these precautions or with specific warnings elsewhere in this manual or any
manual associated with this product violates safety standards of design, manufacture, and intended use
of the product. Quonset Microwave assumes no liability for the customer’s failure to comply with these
requirements.

WARNING

BEFORE APPLYING POWER TO THIS PRODUCT OR MAKING ANY CONNECTIONS TO THIS PROD-
UCT ensure that all instruments are connected to the protective (earth) ground. Any interruption
of the protective earth grounding will cause a potential shock hazard that could result in personal
injury or death.

CAUTION

∙

Use this device with the cables provided.

∙

Do not attempt to service this device. This device should be returned to Quonset Mi-
crowave for any service or repairs.

∙

Do not open the device.

User Environment

This instrument is designed for

indoor

use only.

Quonset Microwave

Revision 2.0.0

iii

«
...
2
3
4
5
6
...
»

Содержание QM1004-8-12-100




























































































Отзывы:

Нет отзывов

Похожие инструкции для QM1004-8-12-100

Бренд: Rabbit Страницы: 120

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 29

Бренд: NEC Страницы: 2

Бренд: Sylvania Страницы: 28

Vertex VCE6-HFC-4C

Бренд: Spirent Страницы: 8

Бренд: Karma Страницы: 2

Бренд: Wacker Neuson Страницы: 22

Бренд: TTI Страницы: 7

5000W AC Power Inverter

Бренд: Wagan Страницы: 11

Бренд: Milexia Страницы: 17

Z-IP Encode 004

Бренд: Z-Band Страницы: 22

EXT-HDSDI-2-DVISSL

Бренд: Gefen Страницы: 21

Бренд: Sumitomo Drive Technologies Страницы: 30

Бренд: SHENZHEN ENCOM ELECTRIC TECHNOLOGIES CO. Страницы: 30

Бренд: SKP Pro Audio Страницы: 20

Single Phase Series

Бренд: Zeus Appollo Страницы: 12

Бренд: Power Tech-On Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды