FOR VERTICAL
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2011 QuoizelInc.
3of4
C
Hanger Nail
Mirror Hanger
Adjustment
Screw
Bracket Catch
Mark "B
"
Hanger
3”
Figure 1
Figure 2
STEP 2
-
Locate Mirror Hangers and Mirror
A. Locate Mirror Hangers (A) and align the top center with
3” Locator mark. Secure them to wall surface with
Hanger Nails (B).
B. With Mirror Hangers properly installed, be sure to make
sure that the (2) Bracket Catches are approximately
equal in length from the top of Mirror Hangers. Adjust
overall length with Adjustment Screws.
C. With the help of another person, pass the Hangers on
the back of the Mirror over the Mirror Hangers (A) so
that the Hangers rest on the inside of the Bracket
Catches.
Clean glass with household glass cleaner. Retain this
sheet for future reference.
Please be noted that the Mirror
Hangers are fully adjustable allowing for easy
leveling.
"
A”
Floor
Surface
½ WIDTH
"
B”
"
C”
BACK
Hanger
STEP 1
Mark Points for Mirror Hangers
-
a. Lift and position where the Mirror will reside on the wall
surface and with a tape measure, mark distance from
floor to the bottom edge of the frame with a pencil. Mark
should be located at a point representing ½ of mirror
width.
b. Place the Mirror on a flat surface with back facing you.
Measure the distance from the bottom edge of the
Mirror Frame to the middle point of (2) Hangers. This
represents distance “B” in the illustration.
c. With tape measure, add this distance to Mark “A” on
wall surface and mark with pencil.
d. Measure distance between (2) Hangers. Add this ½
distance from Mark “B” on each side and mark with
pencil. (Distance “C” in the illustration)
e. Measure 3” up from Mark “C” and mark. These marks
are locators for the (2) Mirror Hangers. Check for marks
straightness with level.
December2011
Assembly Instruction Sheet #IS-QR1252
For Style QR1252
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
