3
2015 QuoizelInc.
Oct.2015
STEP 1:
a. Thread the socket assembly into the rod.
b. Attach the threaded rod together.
c. Secure the bottom of the assembly to the base.
d. Hand tighten until snug.
e. Thread stem onto the coupling on socket assembly.
f. Hand tighten until snug.
g. Place shade over the stem, securing with the finial.
h. Hand tighten until snug.
i. Install correct bulbs referring to fixture markings and/or
labels for maximum wattage.
Your installation is completed now. Restore electricity.
Retain this sheet for future reference.
CARE AND MAINTENANCE
Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean
fixture as they may damage the finish.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Bulbs will not light.
Fuse blows or the
circuit breaker trips
when light is turned
on.
1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
Crossed wires or power wire is
grounding out.
1
. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
Check wire connection.
Rod
Threaded Rod
Base
Finial
Stem
Socket Assembly
Shade