2of2
2019 QuoizelInc.
ReleasedDate:2019-03-22
visit us on-line at www.quoizel.com
STEP 5
-
Mark the Location for the 3 Mounting Holes
A. Place the light fixture onto the post and mark the location of the 3
mounting holes on the fixture fitter onto the post with the marking
pen.
Fixture
Fitter
Marking Pen
Mounting Hole
Post Lighting
Post
Post
Fixture
Fitter
Figure 5
STEP 6
M
C
E
M
H
-
arking the
enter of
ach
ounting
ole
A. Remove the light fixture. Using
the center punch and hammer
marking the center of each
mounting hole location that is
marked with the marking pen.
Center Punch
Hammer
Marking
Post
Figure 7
STEP 7
Drill Holes
-
A. Using the 1/16” bit and drill, drill a pilot hole completely through the
post at each (3) locations marked in step 6 above.
1/16” bit and drill
Post
STEP 8 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from fixture
Figure 6
Figure 8
STEP 9
Attach the fixture to the Post Mount
-
A. Place the fixture on the post lining up the mounting holes on the
fixture fitter with the holes on the post. Use the Mounting Screws (A)
to attach the fixture to the post.
Your fixture is now assembled and ready to use. Enjoy!
Post
Hole
Fixture Fitter
Mounting Hole
Post Lighting
A
Figure 9
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4
"
HGN9010WT
FINISH: WESTERN BRONZE
9.5” Dia.
11”
17.5”
7.5” Dia.
