Package Contents
Warnings and Cautions
1of2
For Style HGN9010WT
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Please go to
for product cleaning tips. Go to the
selection.
marking pen, 1/16”
drill bit, center punch, hammer, drill and wrench.
(1) A21 Medium Base Bulb 150W Maximum, Medium Base Vintage Bulb is recommended, bulb not included.
30-45 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact your original place of purchase.
www.quoizel.com
Care + Maintenance
Light Source:
Estimated Assembly Time:
Preparation:
Tools Required:
Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses,
Installation Guide #IS-HGN9010WT
2019 QuoizelInc.
ReleasedDate:2019-03-22
visit us on-line at www.quoizel.com
A
Mounting Screw
x 3
B
Screw
x 2
C
Fixture Body
x 1
STEP 1
Remove Cage from the
Fixture Body
-
A. Unlock screws on the bracket and
remove the cage from the Fixture
Body (C).
Figure 1
Glass Shade
x 1
D
STEP 3
Install Glass Shade
-
A. Remove the lock ball and flat
washer from the nipple in the top
center of the cage.
B. Place the Glass Shade (D) into
the cage and pass the center
hole on the top of the Glass
Shade (D) over the nipple in the
top center of the cage. Secure
Glass Shade (D) by threading
previously removed flat washer
and lock ball back onto the
nipple. Hand tighten until snug.
Cage
Screw
Bracket
C
STEP 2
Install Bulb
-
A. Insert the bulb onto the socket
and screw snugly into place.
Figure 2
Socket
Vintage Bulb
(recommended
but not included)
Cage
Nipple
D
Flat Washer
Lock Ball
Figure 3
STEP 4
Install Cage with
Glass Shade
-
A. Place the cage with glass
shade onto the bracket and
secure with previously
removed screws. Hand
tighten until snug.
Cage with
Glass Shade
Screw
Bracket
C
Figure 4
