2of2
2016 QuoizelInc.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
ReleasedDate:2016-12-08
STEP 4 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Figure 4
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from fixture
Bare, or Green
Ground wire
from outlet box
OR
Ground wire
from fixture
Green Ground Screw
on the Crossbar
STEP 5
Install the Fixture Body
-
A. Position the backplate and Fixture Body (D) onto the Crossbar
Assembly (A). Place the holes in the backplate over the mounting
screws or alternate short mounting screws. Secure the Fixture Body
by using the mounting balls and hand tighten the mounting balls
until snug.
D
Mounting Ball
A
Backplate
Figure 5
Mounting Screw
or Alternate Short
Mounting Screw
Figure 6
STEP 6
-
Install the Bulb and
Apply Silicone Sealer
A. Insert the bulb onto socket
and screw snugly into place.
B. Make sure the exterior wall
surface and fixture
backplate are free of dirt
before applying caulk. Using
exterior grade caulk, caulk
over top of backplate and
down both sides. Do not
caulk the bottom of the
fixture backplate to ensure
proper moisture drainage.
Your fixture is now
assembled and ready to use.
Enjoy!
Socket
Bulb (not
Supplied)
Exterior
Grade
Caulk
Backplate
Exterior
Grade
Caulk
HC8411IB
FINISH: IMPERIAL BRONZE
NOTE: ALL DIMENSIONS ARE ROUNDED
UP TO THE NEAREST 1/4
"
Fixture can
only be
mounted in
the direction
indicated
11"
4.5"
7"
15.5"
11.75”
