2of2
STEP 4 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Use standard wire connectors (H) to make all wire connections.
Twist connectors until wires are tightly joined together. Wrap each
connection with approved electrical tape and carefully stuff all the
connected wires into the Outlet Box.
Figure 4
Green Ground Screw
on the Crossbar
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
STEP 5
Install Fixture Body
-
A. Carefully tuck all wires into
the outlet box and position
the backplate of Fixture
Body (B) over the outlet
box. Align the holes in the
backplate with the mounting
screws. Place caulk (not
supplied) into the
previously removed
mounting balls and then
attach Fixture Body (B)
using the mounting balls.
Hand tighten until snug.
Figure 5
STEP 6
Install Shade and Bulb
-
A. Place Shade (C) and Steel
Collar (D) over the Socket,
secure by threading Socket
Collar (E) onto Socket. Hand
tighten until sung.
B. Insert bulb onto socket and
screw snugly into place.
Figure 6
Vintage Bulb
(recommended
but not supplied)
STEP 7
-
Apply Silicone Sealer
A. Make sure exterior wall surface and fixture backplate are free of dirt
before applying caulk. Using exterior grade caulk, caulk over top of
backplate and down other side. Do not caulk bottom of fixture
backplate to ensure proper moisture drainage.
Your fixture is now assembled and ready to use. Enjoy!
Figure 7
Exterior
Grade Caulk
Backplate
Exterior
Grade
Caulk
B
Mounting Ball
A
Backplate
Mounting Screw
B
D
E
Socket
C
2018 QuoizelInc.
ReleasedDate:2018-11-12
visit us on-line at www.quoizel.com
