en
18 FOM5-00MO-DE1-16xOx
28.01.2015 / V2.0
Mounting
Before beginning the mounting of the WFZ16.Ox, the
Q AMR network must be set to installation mode.
Since data transfer is implemented optically, it must
be ensured that the windows of the transmission
units, both on the add-on module and on the meter,
are clean and not damaged.
1. Remove the interface cover on the meter
2. Set the module in place
3. Screw the module in place using the two screws provided
Only seal the add-on module after successful start-up!
4. Push the seals on the module to the screw head.
Shortly after placement, the module will set up a connec-
tion with the calculator unit via the optical interface and
read out the device information from the heat meter. Suc-
cessful connection is displayed on the meter as follows:
„FA[Software-Version]“
