- 5 -
automatically saved after 5 sec of setting.
『
USB Interface
』
Support sampling bits 16Bit / 24Bit,sampling rate 44.1k-192kHz and DSD64
（
Dop
）
.
Compatible with Mac OS and Linux systems
（
no need to install driver
）
.
Compatible with systems from WIN XP to WIN10 32 / 64 bit, manual driver installment is
necessary for initial connection with PC. Driver download address is below :
http://www.qlshifi.com/zlxz.htm.
『
Usual Fault Diagnosis and Solution
』
1.No display or output after startup
The fuse of power input may be burnt. Solution: remove and check the fuse.
2.Display but no output after startup
Several possibilities:
◆
The input channel or the current active channel may be false. Try other channels to
test.
◆
The input signal is incompatible, e.g. DTS file.
◆
The front-end device is set up wrong. For example, as an audio source, QA360 blocks
off the digital output function.
3. Output ready but no display
Please check if it is in the off-screen mode by pressing the remote control.
4. Normal host, abnormal remote control
The remote control may be short of power, please change a new battery and try again.
Please contact us if the faults above remain or any other problems pop out.
