Quivogne TINEMASTER, Руководство по эксплуатации, техническому обслуживанию и каталог запасных частей

Страница: 5 / 44

Setting The Angles Of The Disc Gangs
When setting into work we suggest that the angle of the discs is initially
set as follows:
Front Discs: Set to the 3
rd
hole from the front
Rear Discs: Set to the 3
rd
hole from the rear
From this position ‘opening’ the discs (moving the front discs further
forward and the rear discs further back) will increase the cutting action.
‘Closing’ the discs (moving the front discs backwards and the rear discs
forwards) will reduce the cutting action.
If the discs leave a ridge or depression in the middle, carry out the
following minor adjustments.
To remove a ridge:
OPEN up the front set of discs by 1 or 2 holes.
To remove a depression:
CLOSE up the front set of discs by 1 or 2 holes.