NIMBUS
|
USER MANUAL
|
V-O1 | PAGE 4
IMPORTANT SAFETY INSTRUCTIONS
1 Read Instructions
—All safety and operating
instructions should be read before operating
the device.
2 Heed Warnings
—All warnings on the device and in
the operating instructions should be adhered to.
3 Follow Instruction
s—All operating and safety
instructions should be followed.
4 Water & Moisture
—DO NOT submerge in water
or place in a dishwasher, as it will cause damage
to the internal electrical components. The device
should never be used in, on or near water for risk
of electric shock.
5 Batteries
—Use the recommended lithium
batteries for best performance. Keep batteries
away from children. Keep batteries away from
water and heat.
6 Batteries
—Replace exhausted batteries
immediately. When replacing batteries, be sure
to replace all batteries at the same time. Do NOT
mix old and new, or other battery types.
7 Ventilation
—The device should always be located
in such a way that it maintains proper ventilation,
including in the refrigerator.
8 Heat
—Never locate the device near heat sources
such as radiators, floor registers, stoves or other
heat-generating devices.
9 Cleaning
—The device should be cleaned in
accordance with manufacturer’s instructions stated
in the Precautions, Care and Maintenance section.
10 Periods Of Non-Use
—Remove the batteries
when the device is not expected to be used
for several months.
11 Dangerous Entry
—Care should be taken that no
foreign objects or liquids fall or are spilled on or
inside the device.
12 Damage Requiring Service
—The device should
be serviced by licensed technicians when:
The internal electronic components have
been damaged.
Objects have fallen or liquid spilled inside
of the device.
The device has been exposed to moisture.
The device does not appear to be operating
properly or exhibits a marked change in
performance.
The device has been dropped or becomes
damaged.
13 Service
—The device should always be serviced
by licensed technicians. Only replacement parts
specified by the manufacturer should be used.
The use of unauthorized substitutions may result
in fire, shock, or other hazards.
A NOTE ABOUT RECYCLING:
This product and its packaging materials are
recyclable. Please dispose of any materials in
accordance with the local recycling regulations.
When discarding the unit, comply with local rules
or regulations. wwThis product and the supplied
accessories constitute the applicable product
according to the
WEEE
directive.
MODIFICATIONS DISCLAIMER
WARNING!!!
Changes or modifications not expressly approved
by the manufacturer could void the user’s
authority to operate the equipment.
Note: The manufacturer is not responsible
for any Radio or TV interference caused by
unauthorized modifications to this equipment.
Such modifications could void the user’s authority
to operate the equipment.
FCC COMPLIANCE
This device complies with Part
15
of the
FCC
Rules. Operation is subject to the following two
conditions: (
1
) this device may not cause harmful
interference, and (
2
) this device must accept any
interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved
by Quirky could void the user’s authority to
operate the equipment.
NOTE
: This equipment has
been tested and found to comply with the limits for
a Class B digital device, pursuant to Part
15
of the
FCC
Rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.