GB-2
INTRODUCTION
Congratulations !
You have just purchased one of the world’s most
sophisticated radar detectors. Please read this
instruction manual before installation. All instruc-
tions are necessary to achieve optimum use and
trouble-free performance of your XT-9500.
However, owning a radar detector does not give you a
license to speed. It is to be used as defence against
unnecessary speeding offences caused by revenue-
generating speed traps or occasional lapses of
concentration on the part of the driver. Please
drive safely.
XT-9500 FEATURES
1. ON/OFF and Dip key (PWR)
Key to switch the appliance ON/OFF. To dip or to
switch the display off, you should keep this key
pressed.
2. Volume key (
/
)
Key to adjust the volume of the alarm tones.
3. Mute button
Activates mute mode, which silences the audio
alarm only.
4. City/Highway button (CITY)
Decreases the unit sensitivity to radar signals
when city mode is engaged.
5. Speaker
6. Power Input Jack
7. Receiving window Radar & Laser
8. Receiving window Laser
9. Lock button for windshield bracket
10. Windshield bracket
11. Power cord
12. Hook and loop fastener tape
INSTALLATION
A. GENERAL GUIDELINES
The following are some guidelines for mounting
the detector :
Mount the detector so that the receiving win-
dow/sensor has an unobstructed view of the
road ahead. The sensor is located at the opposite
end from the control window.
The unit may be positioned within 25° of horizon-
tal without significantly degrading performance.
Do not mount directly behind windshield wipers.
Do not mount behind a mirrored sunscreen, as
it has a thin layer of aluminium on a plastic film
which will block radar/laser signals.
•
•
•
•
xt9500.indd 2
15/07/2009 14:11:06
