Quinny ZAPP, Инструкция по эксплуатации

Страница: 11 / 16

11
Preparing the Zapp seat for use
(15) Fasten the cover to the foot end of the seat.
(16) Place the Zapp in a half-open position and tilt the
frame until it is resting on the rear wheels and
adapter attachments.
(17) The ends of the cover have markings that correspond
to the markings at the end of the cover grooves.
(18) First slide each end piece into the corresponding
groove and then pull the cover into place.
(19) Slide the cover stops into the cover grooves.
(20) Unfold the Zapp completely and fasten the hooks to
the tubes.
Using the Zapp:
Hood
(21) Slide off the covers of the adapter attachments and
store them carefully.
(22) Slide both ends of the hood into the adapter
attachments until you hear a “click”.
(23) Fasten the hood to the top of the Zapp using the
snaps and Velcro. Check to make sure the hood is
fastened securely.
(24) The hood can be adjusted to two different positions:
folded out or folded back. Note: The Zapp can be
folded without removing the hood. To remove the
hood, unfasten the snaps and Velcro and pull the
hood out of the adapter attachments. Slide the
covers back onto the adapter attachments.
Placing your child in the Zapp
Set the brake on the Zapp before placing your child in it.
Make sure the safety harness is unhooked before placing
your child in the pushchair seat.
(25) Slide the buckle sections together. Fasten the lap and
shoulder belts to the crotch strap by “clicking” the
buckle sections into the buckle.
(26) Adjust the belts to the size of your child by
lengthening or shortening them using the clasps.
(27) Push both buttons to open the belt buckle. There are
D-rings for attaching an additional safety harness.
Make sure it complies with all safety standards
(i.e. the BS 6684) before using it.
(28) Important! The fasteners on the side of the safety
harnesses are for attaching the footmuff only.
Locking the swivel wheel
It is advisable to lock the swivel wheel into a fixed position
when using the pushchair in a straight direction for a
longer period.
(29) Push the swivel wheel lock downwards and turn
the front wheel into the backward position until you
hear a “click”. The front wheel is now locked into the
fixed position. To unlock the swivel wheel, push the
swivel wheel lock upwards.
GB <<