Quincy QGV Series, Инструкция по эксплуатации

Страница: 35 / 90

Section IV - Operating Procedures
Exit Runtime -
Touching ‘Exit Runtime’ accesses the
system menu shown above. In this menu:
• ‘Transfer’ enables downloading of a
new program (from a laptop).
• ‘Start’ returns to the control panel
program.
• ‘Control Panel’ accesses Windows
CE operating system to allow the
program to be saved to the compact
flash card or restored (uploaded) to the
control panel. Service screens are also
available to adjust the contrast of the
display, calibration of the touch input
and other items associated with the
panel.
notiCe!
Programs may be uploaded without
requiring the drive to be shutdown,
however, all values in the trend
buffer and local variable storage will
be lost when the new program is
downloaded.
Stopping the Compressor - Normal
Operation
• Close the service valve to the plant air
distribution system.
• Allow the pressure to build within the
reservoir and the compressor to fully
unload.
• Touch the ‘Stop’ button on the touch
screen or remove power at the main
disconnect switch or panel.
notiCe!
Close the service valve when the
compressor is not being used to
prevent the system’s air pressure from
leaking back into the compressor if the
check valve leaks or fails.
Stopping the Compressor -
Emergency
Press the red stop button on the electrical
enclosure door or remove power at the
main disconnect switch or panel.
Quincy Compressor-QGV Series
29