manualshive.com logo in svg

Quincy QGV-100, Инструкция по эксплуатации

Поделиться
Скачать
Quincy QGV-100 Скачать руководство пользователя страница 5

Table of Contents

Section Vii - troubleshooting

Failure to Start ...................................................................................................................60
Unscheduled Shutdown ....................................................................................................6
Thermal Overload Relays Tripping ....................................................................................6
Low Air Delivery ................................................................................................................62
Low Receiver Pressure .......................................................................................................62
High Receiver Pressure ......................................................................................................62
High Discharge Air Temperature and/or High Fluid Injection Temperature .....................63
Frequent Air/Fluid Separator Clogging .............................................................................64
Fluid Discharge Out Blowdown Valve ...............................................................................65
Frequent Fluid Filter Clogging ..........................................................................................65
Excessive Water Content In Fluid ......................................................................................65
Excessive Fluid Consumption ............................................................................................66
Frequent Air Cleaner Clogging .........................................................................................66
Inlet Valve Not Opening Or Closing In Relation To Air Demand ......................................66
Compressor Does Not Unload When There Is No Air Demand ........................................67
Compressor Does Not Revert To Load When Service Line Pressure Drops
To Reset Pressure ..............................................................................................................67
Compressor Will Not Time-out Or Shut Down When Unloaded (Auto/Dual Only) ..........67
Excessive Water in Plant Air Distribution System ..............................................................67
Pressure Relief Valve Exhausting .......................................................................................67

appendix a - Dimensional Drawings

QGV-50 (air-cooled) ..........................................................................................................68
QGV-50 (water-cooled) .....................................................................................................69
QGV-75/00 (air-cooled) ...................................................................................................70
QGV-75/00 (water-cooled) ..............................................................................................7
QGV-50/200 (air-cooled) .................................................................................................72
QGV-50/200 (water-cooled) ............................................................................................73

appendix B - technical Data

QGV-50 .............................................................................................................................74
QGV-75 .............................................................................................................................75
QGV-00 ...........................................................................................................................76
QGV-50 ...........................................................................................................................77
QGV-200 ...........................................................................................................................78

appendix C - Maintenance record

Maintenance Record .........................................................................................................79

Standard terms and Conditions

Standard Terms and Conditions .................................................................................. 80-8

 

Quincy Compressor-QGV Series 

Содержание QGV-100



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды