Read Operating Instructions thoroughly prior to operation. Use only a grounded outlet that is rated for
your models' electrical requirement. Conduct periodic maintenance as required. CAUTION:
EXPOSED ELEMENT - Operate unit well away from flammable solvents, gasses and materials.
Operate on non-combustible surface only.
Read Operating Instructions Thoroughly Prior to Operation
Safety Precautions
PAGE 1
Issue Rev A 0908
Quincy Lab Inc. 1925 N. Leamington Ave. Chicago, Illinois 60639 1-800-482-HEAT (4328)
Copyright Quincy Lab Inc. 2008
Model Series 160
Plastic Forming Strip Heaters
OPERATING MANUAL
Quincy Lab, Inc.
Overall Dimensions
INCHES W x H x D
(CM) W x H x D
15.125x5.5x7.25
25x5.5x7.25
36x5.5x7.25
Weight (lbs)
SHIPPING
STAND ALONE
7 lbs
6 lbs
9 lbs
7 3/4 lbs
12 lbs
10 1/2 lbs
Standard Electrical*
38.45x14x18.4
63.5x14x18.4
91.4x14x18.4
Specifications
MODEL
03-160
MODEL
13-160
MODEL
23-160
Working Area
Common Unit Construction
Exterior
: Powder-Coated Steel
Plug/Cord Assy:
UL SJOW 18/3
Power Controls:
On/Off Toggle & Power Light
Heater:
Resistive-Tubular Incoloy
VOLTS / WATTS
115 / 125
115 / 200
115 / 350
* Working Max Operating
Temperature Range (F)
325
o
/ 410
o
340
o
/ 435
o
A
U T
I O N
A
U T
I O N
URF
ACE MA
Y BE HO
T
CAU
TIO
N
CAU
TIO
N
WORK SURF
ACE MA
Y BE HO
T
12"
21"
33"
AMPS
1.08
1.72
3.02
After unpacking, verify receipt of correct quantities of each component and that each component has
not suffered any shipping damage. If there are any problems, please refer to the enclosed
Damaged/Missing Item Report.
Receiving
MODEL
03-160
SHOWN
CAUTION
AND EXPOSED ELEMENT
CAU
TIO
N
HOT SURFACES
* Measured with workpiece in place - (varies with piece size and length).
325
o
/ 410
o
