Operation Procedures
:
•
Unlock all locking mechanisms and ensure
that the doors are free of obstructions.
•
Turn the Power Switch to the “on” position,
located on the upper left hand corner.
•
Proper operation of the “Up-Eye” unit requires
the attendant to be directly in front of and
over all 3 photoelectric sensors while serv-
ing. Proper operation of the “Thru-Beam” unit
requires the attendant to stand between the
Emitter and Receiver eyes.
•
<Note> The outside edge of the photo-bar
should be lined up with the outside edge of
the locking jamb.
General Cleaning Guidelines
:
•
All weather-stripping should be checked and
cleaned weekly.
•
All glass, aluminum framing, stainless steel,
and plastic eye covers & lens should be kept
clean at all times.
All cleaning fluids and ap-
plicators should be non-abrasive
.
General Maintenance
:
•
Slide rail system should be kept clean and re-
oiled with lightweight oil every six (6) months.
•
The hook lock and thumb turn should be
cleaned of any grease or grime build up every
six (6) months.
•
The eye covers, whether “Up-Eye” or “Thru-
Beam, should be cleaned of any dirt or debris
daily with a non-abrasive cleaner.
To gain access to the internal compo-
nents for each window, the access panel
must be removed.
Service Manual
SST-4035E
Quikserv Corp.
©
quikserv.com
• -800-388-8307 • Fax (73) 849-5708
Automatic Slider
Operation and Maintenance Procedures
Warning
For your own safety, turn
power switch OFF before
removing the access
panel.
