10
GP-1200 6-IN-1 SEEDER INSTRUCTION MANUAL
1PT. HITCH RECEIVER
Each Seeder comes with a 1-point hitch hook-up that connects directly to your
ATV or UTV. This hitch is designed to fit a 50mm trailer ball. (Adjustment can be
made by loosening or tightening the nut on the under-side of the coupler hitch).
TOP LINK HOOK-UP
The Down Pressure System is designed so the user can apply disc pressure to
either the front or the rear of the unit. (Unit is recommended to be set level to
plant to get correct coverage with the chain drag and/or press roller).
PRESS ROLLER
The roller is designed for compaction of the soil over the seed thus increasing
seed to soil contact for optimal germination of what has been planted. The roller
can also be used for added weight during tillage. This is achieved by leaving the
roller in the folded position and resting it over the front disc.
ELECTRIC LIFT
The Electric Lift serves many purposes; one is the ability to rise & lower your unit
for transport, the other is to gauge the depth of discing and or planting. This is
activated by the UP/DOWN switch that is located on the control box.
WHEEL ASSEMBLY
The Wheel Assembly is how the unit travels when in transport mode, and is
connected to the Electric Lift to raise and lower the unit.
BE SURE TO PACK WHEELS WITH GREASE EVERY 10 HOURS OF USE TO
EXTEND THE LIFE OF THE WHEEL HUB, BEARING/BUSHING WHICHEVER
MAY APPLY TO YOUR MODEL.
IMPORTANT
3
BASIC OPERATIONAL INFORMATION
DISC PLOUGH ASSEMBLY
The Disc Plough is set in a manner that soil disturbance is substantial and mimics
a “cross cut” affect for greater mixing of all types of the soil.
