Operation Manual - VLAN
Quidway S5000 Series Ethernet Switches
Chapter 2 GARP/GVRP Configuration
2-6
II. Networking diagram
GE0/1
Switch A
Switch B
GE0/2
Figure 2-1
GVRP configuration example
III. Configuration procedure
Configure Switch A:
# Enable
GVRP globally.
[Quidway] gvrp
# Set
GigabitEthernet0/1 as a Trunk port and allows all the VLANs to pass through.
[Quidway] interface gigabitethernet0/1
[Quidway-GigabitEthernet0/1] port link-type trunk
[Quidway-GigabitEthernet0/1] port trunk permit vlan all
# Enable GVRP on the
Trunk port.
[Quidway-GigabitEthernet0/1
]
gvrp
Configure Switch B:
#
Enable
GVRP globally.
[Quidway] gvrp
# Set
GigabitEthernet0/2 as a Trunk port and allows all the VLANs to pass through.
[Quidway] interface gigabitethernet0/2
[Quidway-GigabitEthernet0/2
]
port link-type trunk
[Quidway-GigabitEthernet0/2
]
port trunk permit vlan all
# Enable GVRP on the
Trunk port.
[Quidway-GigabitEthernet0/2
]
gvrp
