Quicksilver 905WE, Руководство пользователя

Страница: 58 / 87

Quicksilver 905WE — System & Component Overview and Operation
46
Refer to the manufacturer’s manual for complete instructions and warranty.
20. Petrol Generator (optional)
If equipped, the petrol powered generator is driven by a self contained engine and provides 230V
Alternating Current (AC). Depending on the electrical load, Quicksilver® offers either a 4kW or 6kW low
CO generator. The system consists of a seawater pickup system for cooling, an engine exhaust with a
muffler, a ship / shore power contactor for power distribution, and a petrol vapor blower system.
Carbon Monoxide can cause severe nausea, fainting or
death. The exhaust system must be leak proof and routinely
inspected.
Moving parts can cause severe injury or death. Operate the
generator only when all guards, screens and covers are in
place.
Fire can cause severe injury or death. Do not smoke or allow
sparks or flames near the fuel system. Avoid contact of
flammable materials with hot engine parts.
Operation
It is recommended that you read and understand the information in the manufacturer’s owners
manual before operation. The generator is warranted separately by the generator manufacturer, NOT
Quicksilver®. Follow the recommended maintenance and warranty schedule per the generator
manufacturer. Generator abuse or improper maintenance may adversely affect claims made under
generator manufacturer separate warranty.
Fuel System
The petrol generator pulls fuel from the main tank, through an anti - siphon valve. Do not remove the
anti - siphon valve, as this prevents fuel from siphoning out of the tank if the fuel line was ever cut or
broken below the level of the fuel in the tank. Do not run the generator out of fuel because there is
the potential of drawing in air and necessitating bleeding of the system before restarting the unit. As
a precaution, check the fuel lines frequently for leaks or any surface cracking on the hose. Replace the
hose immediately if any issues are found.
Ventilation of Bilge Space
Prior to starting the generator, you must run the bilge blower for at least four minutes and manually
check the bilge for fuel or fuel vapor. Quicksilver® also recommends that you run the blower when
operating below cruising speed. To operate the blower, press the blower switch located under the
helm seat next to the generator remote start.
Explosive fuel vapors can cause sever injury or death. Use
extreme caution when handling, storing and using fuels. Do
not store equipment containing petrol in non - vented areas.
Prior to starting the generator, check the bilge for fuel or
fuel vapor. If fumes are detected, do not start the generator
until the source of fumes is determined, corrected, and the
bilge area is safely ventilated.
Engine Cooling
Make sure that engine cooling water is flowing throughout the system. On the port side of the engine
compartment, there is an external water pickup for cooling the engine. Prior to starting the engine,
make sure that the seacock is opened and water is throughout the system. FAILURE TO DO THIS WILL
CAUSE DAMAGE TO THE ENGINE.