Quicksilver 675BR, Руководство пользователя

Страница: 31 / 55

Quicksilver 675BR — System & Component Overview and Operation
19
through a seacock in the bottom of the hull. The macerator control is located above the main battery
panel in the aft storage tub. Since direct overboard discharge is prohibited in many areas, the
macerator seacock is normally closed.
To Operate the Macerator:
1. Make sure the macerator seacock is in the open position.
2. Press and hold the macerator switch located above the main battery panel. The macerator
switch is a momentary switch, which means that it needs to be pressed during operation.
3. When the tank is empty, stop pressing the macerator switch.
4. Return the macerator seacock to the closed position.
Macerator Switch Location
Macerator switch
Toilet
Avoid inadvertent discharge of the black water system.
Always keep the macerator seacock closed when not in use.
Rotate the interior step so that the
toilet will not hit it when sliding
into the operational position.
Unlatch the dead bolt. Using the
notch in the board, slide the toilet
out from the storage position. Lock
dead bolt in forward position.