5
Micro speaker
output socket
Dish Connections:
Elevation Meter
F-type
Connector
3.5mm input socket
7)
Connect the push fit F-type connector on the 10 metre dual cable (Item C) to either of the screw
sockets on the rear of the dish and the 3.5mm jack plug to the speaker input socket as indicated above.
8)
Attach the magnetic base of the elevation meter (Item D) to the bracket
9)
Insert the micro speaker (Item E) in to the output socket located on the side of the bracket
Please ensure the micro speaker has batteries inserted and the switch is set to ON
Once you have connected your
QuickSAT dish and positioned
the speaker and meter it should look like the
image below:
