http://www.QuickPhones.com
http://www.QuickPhones.com
The Complete User Manual and
Firmware Upgrades
can be found at:
http://www.QuickPhones.com/support.html
STEP 3
Basic Configuration
Web Configuration:
Note: If you are not using a DHCP server to
assign IP addresses, you must manually set the
phone’s network information (see next panel).
1.Determine phone’s IP address: Press the
Menu key. Choose Network. Type the
password (default is “1234”), and press the OK
softkey. Highlight LAN Port Settings, and press
the Info softkey.
2.Login to the phone’s web interface: Use a web
browser to navigate to the phone’s IP address at
port 8000 (example:
http://192.168.100.50:8000). The phone’s login
screen will be displayed. The default username
is “admin” and the default password is “1234”.
3.Setup SIP account: After logging in, click SIP
Accounts, and click ID # 1. Next to
Registration:, click the Enable radio button.
Enter the information for your SIP account
provided by your network administrator.
4.Click the Submit button.
5.The phone should register with the SIP server.
The Username for the registered SIP account
will show on the phone’s LCD.
For complete configuration and reference
information, download the QB-241/242 User
Manual at:
http://www.QuickPhones.com/support.html
STEP 3 (cont’d)
Basic Configuration
Manual Configuration:
Basic configuration can be accomplished using
the phone’s keypad and LCD.
NOTE: When entering addresses, press the *
key to enter a period (i.e. “dot”). In some
submenus, you can use the # key to toggle
character entry mode (“ABC” or “123”).
1.Enter network information: Press the Menu
key. Choose Network. Type the password
(default is “1234”), and press the OK softkey.
Use these submenus to enter information
required to connect the phone to your network.
Use the navigation keys and softkeys to make
selections. Use the keypad to enter
numbers/text. Press the Save softkey after
typing in information to save changes.
2.Setup SIP Account: Press the Menu key.
Choose SIP Accounts. Type the password
(default is “1234”), and press the OK softkey.
Select 1. Use these submenus to enter the
information for your SIP account provided by
your network administrator.
NOTE: Before leaving the configuration
submenu for the SIP account, you must press
the Apply softkey to save changes. Otherwise,
the configuration information will be lost.
STEP 4
Use the Phone
1-Message Indicator: indicates that you have an
incoming call or new voicemail
2-Display Screen: displays calls and status
information
3-Navigation Keys: scroll through lists and menus
4-Enter: enter a highlighted menu
5-Menu: access menu or quit to main screen
6-Voice Mail: dials programmed voicemail number;
when lit, indicates new voicemail message
7-Speed Dial/BLF: speed dial programmed numbers;
in BLF (busy lamp field) mode, also shows status
of each programmed extension
8-Speaker: activates/deactivates speakerphone
9-Keypad: use to enter numbers/text
10-Headset: activates/deactivates headset
11-Softkeys/Function keys:
Softkeys: context-sensitive functions; see bottom
of LCD for current menu functions
LINE1/LINE2: Press to activate/deactivate a line;
also lights to indicate line status:
(not lit): line is idle
GREEN: incoming call or off-hook
RED: active call
FLASHING GREEN: call on hold
Hold: put an active call on hold
Redial: display dialed calls history
12-Volume keys: adjust ring volume and voice
volume
