Quickie Tango
23
6.6 fixed seat tilt:
The seat can be tilted and set manually within a range of
0° to 9° (Fig.6.4).
Undo the 2 studs.
•
Move the seat to the desired tilt angle.
•
Replace and tighten the 2 studs.
•
6.7 manual seat tilt:
The manual seat tilt option allows tilt up to 25
°
, (Fig.6.5).
To operate the tilt;
Squeeze the tilt actuator lever located on the back
•
brace.
Use the push handles to move the seat to the desired
•
tilt angle.
Let the lever go.
•
The seat tilt locks in place automatically.
•
fig.6.4
tIlt
adjuster
studs
6.8 powered seat tilt:
The seat can tilt up to 25 degrees by operating it through
your control system or the Quickie Direct Actuator
Control.
cautIon!
Operating the powered tilt greater than 9 degrees from
its lowest position will bring the chair into ‘creep mode’,
allowing slow speed driving only.
To operate the powered tilt:
Push the mode button to select actuator mode.
Operate the joystick left or right to select the actuator
required (actuator 1 or actuator 2). Selection is indicated
via the lighting of the orange LED adjacent to the desired
actuator number.
Operate the joystick in the forward or rearward direction to
move the tilt forward or backward.
Release the joystick when the desired angle is reached.
To return to drive mode, press the actuator button again.
Once the seat is fully tilted or in its lowest position do not
hold the joystick in its operat ing position as this could
damage the actuator.
fig.6.5
seat tIlt
actuator
lever
