manualshive.com logo in svg

Quickie Sunrise Q300M, Инструкция по эксплуатации

Поделиться
Скачать
Quickie Sunrise Q300M Скачать руководство пользователя страница 38

38

       Q300M

Rev.1.0

ENGLISH

6.13 JAY backrests

The standard backrest assembly will allow the fitting of a 

JAY backrest, which is available as an optional extra.

6.14 Headrest 

To fit the Standard headrest, fit the location bracket to 

the push handles, using the screws and nuts supplied, 

ensuring that they are fully tightened.
To fit the Rehab headrest, fit the location bracket to the 

backrest bracket, using the screws and nuts supplied, 

ensuring that they are fully tightened.

Adjusting the Headrest (All).

The headrest height is changed by loosening the 

adjustment knob and sliding the inner vertical tube to the 

desired position and tightening the knob. The headrest 

to seat depth is adjusted by loosening the 6mm Allen 

screws and moving the hinge to the desired position 

and then tightening the screws securely. To adjust the 

headrest angle, loosen the screws at the headrest 

upholstery, position the headrest as required and tighten 

the screws securely. (Fig.6.27).

Fig. 6.27

Содержание Sunrise Q300M

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды