930475 Rev. A
X . O p e r a t i n g G u i d e
41
• When you release the joystick it will return to
neutral; the chair will slow to a stop and the
motor locks will reengage.
• We recommend that you switch the chair off if
you stop for any length of time. This will con-
serve battery power.
NOTE–
Once the chair stops, switching the chair off
will not affect the motor locks.
6. Joystick Boot (H)
Make sure the boot is not torn or cracked (this could
allow debris, water or moisture to enter). If the boot is
torn or cracked, replace it as soon as you can.
F. REMOTE JOYSTICK ASSEMBLY (OPTIONAL)
The remote joystick connects to a controller, which
controls the chair’s performance. The joystick assembly
consists of the following parts:
1. Speed Control Knob (D)
Use the speed control knob to adjust the maximum
speed of your chair. Turn it counter-clockwise to reduce
speed; turn it clockwise to increase speed.
2. Battery Charge Indicator (B)
• Green lights indicate that batteries are fully
charged.
• Yellow lights indicate that batteries need
recharging.
• When the lights stay in the red band, the batter-
ies must be recharged.
3. On/Off Mode switch (A)
The on/off mode switch is located on the rear face of
the joystick housing. It is a toggle switch. Turning the
chair on or off, is accomplished by pressing the switch
downward. The switch will automatically return to the
center point. Alternate locations exist for this switch.
Please see your supplier in the event that you wish to
relocate or re-orient this switch.
4. Mode Switch (A)
The on/off mode switch allows you to select from 5
(five) different programmable drive profiles or actuator
mode sets.
X . O p e r a t i n g G u i d e
930475 Rev. A
40
E. INTEGRAL JOYSTICK
The standard integral joystick controls the chair’s per-
formance. It consists of the following parts:
1. Speed Control or Drive Mode Selection Buttons
(A and B)
To decrease the speed level depress button A. Or, when
1- 5 Drive modes are programmed, depress button A to
activate lower drive mode(s).
To increase speed level, depress button B. Or, when 1-
5 Drive modes are programmed, depress button B to
activate higher drive mode(s).
Speed level active, or Drive Mode selected, is indicated
on display (C) by a series of five lights. One light indi-
cates slowest level/mode currently active, while five
lights indicates highest level/mode currently active.
2. Battery Charge Indicator (D)
• Green lights indicate that batteries are fully
charged.
• Yellow lights indicate that batteries need
recharging.
• When the lights stay in the red band, the batter-
ies must be recharged.
3. On/Off Button (E)
Turning the chair on or off is accomplished by depress-
ing button E.
4. Horn (F)
5. Joystick (G)
The joystick controls the direction and speed of your
chair. Turn the chair on and move the joystick in the
direction you want to go.
• Moving the joystick from the neutral (center)
position disengages the motor locks, allowing
the chair to move.
• The chair will move faster the more you move
the joystick away from neutral.
NOTE–
If your speed becomes hard to manage, release
the Joystick and the chair will come to a com-
plete stop.
A
D
F
G
H
B
E
C
Integral Joystick
A
D
E
F
G
H
B
Remote Joystick (Optional)
