5
SUNRISE
smart MAN-MACHINE INTERFACE (sMMI)
Figure 6: Standard screen
SWITCHING ON
Switch on the system by briefly holding down the middle button. If
the pedelec has not been in operation for more than 48 hours, first
wake up the battery by pressing the button on the battery once.
SWITCHING OFF
To switch off your
P
edelec, press the middle button for about two
seconds. This takes you to the menu where you can select the
“Switch off” function.
AUTOMATIC SHUTDOWN
If your
P
edelec is not in use for 10 minutes, the system is
automatically switched off.
The standard screen
After switching on, the starting screen appears, followed by the
standard screen. The
P
edelec is ready for operation.
The following information can be displayed if you briefly press the
middle button in the info box:
•
Tour km: kilometres travelled on the current tour
•
Tour h: travel time on the current tour
Figure 9: Recuperation active
Figure 7: Recuperation
level 1
•
Ø km/h: Average speed on the current tour
•
Tot.-km: The total mileage of the motor
•
A: Current power consumption
•
Eco, Tour oder Boost: selected riding mode. You can find out
how to change this riding mode in the next section
CHOOSING THE ASSISTANCE LEVEL /
RECUPERATION LEVEL
Use the Up/Down button on the remote control to adjust the
levels of assistance or enable recuperation. Please note that
recuperation can only be activated with a partially discharged
battery (charge status < 90 %), at a battery cell temperature
above 0 °C and at speeds of 10 – 28 km/h.
PUSHING AID
Pushing aid can be activated by holding down the top button for
two seconds.
TOUR RESET
If you press and hold the bottom button for at least two seconds,
the tour data is reset to zero.
Figure 10: Pushing aid active
Figure 8: Standard screen 3
PUSHING AID
MK-100383 Rev. A
