Quickboats foundation series Скачать руководство пользователя страница 19

19   

 

 

 

 

    

Quickboats Foundation Series User Guide - Nov 2014

3.1 

QUICKBOATS PLAIN ENGLISH WARRANTY

Quickboats offer a 3 year warranty on all Quickboats:

Year 1

Year 1 is full parts and labour warranty. If there is any 

defect in manufacture found in the first 12 months from the 

date of delivery of your Quickboat, Quickboats will pay for:

• 

Labour

• 

Replacement parts

• 

Materials for repair

• 

Freight to have the boat, or component of the boat 

repaired or replaced.

The decision to repair or replace is solely Quickboats’  

to decide.

Year 2 & 3

Years 2 and 3 of the warranty cover parts and materials 

only. If there is a defect in manufacture of your Quickboat 

found in the 13th month to 36th month from the date of 

delivery of your Quickboat, Quickboats will pay for:

• 

Replacement parts

• 

Materials for repair

• 

Freight of the parts and / or materials

The owner is responsible for any labour charge and freight 

cost of the boat to and from the repairer.

The decision to repair or replace is solely Quickboats’  

to decide.

Warranty Steps

1. If you notice a defect on your boat please send us an 

email or a letter including:

• 

A description of the defect

• 

Where on the boat the defect is located

• 

Photographs of the defect and its location on the boat

• 

A contact phone number

This will assist us in doing an initial assessment of the 

defect, which will then determine the best way to fix the 

defect.

2. A Quickboats representative will call you and discuss the 

defect, provide you with a claim number, and let you know 

the best way of handling the claim.

**DO NOT SEND YOUR BOAT OR ANY PART BACK TO 
QUICKBOATS UNLESS SPECIFICALLY REQUESTED 

 

BY QUICKBOATS**

Fine-print

1. Quickboats warrants all components to be free from 

defects in materials and workmanship for a period of three 

years from date of original delivery.

2. The warranty is subject to the boat being used for rec-

reational purposes only and within recommended operat-

ing parameters. The warranty is applicable to the original 

purchaser of the boat and is not transferrable.

3. The warranty is voided if the boat is:

• 

Used for commercial purposes of any kind;

• 

Used for competition or racing;

• 

Towed or used for towing;

• 

Used with a motor heavier or more powerful than  

that stated on the Builders Plate;

• 

Loaded above the maximum weight stated on the 

Builders Plate;

• 

Not used in accordance with the User Guide;

• 

Not assembled or packed away in accordance with  

the User Guide;

• 

Not stored properly (ie packed away dry in its bags) 

when not in use;

• 

Used outside of safe boating practices;

• 

Damaged by improper use, neglect or accident;

• 

The Hull Identification Number (HIN) plate or Builders 

Plate are changed, defaced or detached in any way; 

• 

Placed on a trailer (other than a Quickboats authorised 

Beach-lift trailer).

4. Your boat has been hand made using high-tech compos-

ites for lightweight and strength. There may be some minor 

indentations in the panels that do not impact on the boat’s 

performance. These indentations are expected in this type 

of product and are not covered under this warranty.

5. The internal panels, including seats, are not warranted 

against degradation caused by fuel or rough treatment. 

They are only warranted against defects in manufacture.

6. Quickboats retains the right to substitute comparable 

product.

7. Certain legislation including the Trade Practices Act 1974 

as amended (“the Act”) has the effect of giving a consumer 

as defined therein certain rights which cannot be excluded, 
restricted or modified by agreement. The provision of this 

Agreement must therefore be read having regard to such 

legislation to the extent that it may be applicable and noth-

ing in this Agreement shall have the effect of excluding, 

restricting or modifying such rights.

Содержание foundation series























Отзывы: