Quick HC 1012, Руководство пользователя

Страница: 15 / 36

15
GB
HECTOR 700/1000/1500W - REV007A
WARNING: make sure the electrical power to the motor
is switched off when working manually on the windlass.
Carefully remove the chain or rope from the gypsy or the
rope from the drum.
Quick ® windlasses are manufactured with materials resistant
to marine environments. In any case, any salt deposits on the
outside must be removed periodically to avoid corrosion and
damage to the equipment.
The parts where salt may have built up should be washed thor-
oughly with fresh water.
Once a year, the drum and the gypsy are to be taken apart as
follows:
GYPSY SIDE
Using the handle (22) remove the bush (2) loosen the screws
(21), remove the gypsy cover (20) and the top clutch cone (19);
loosen the fi xing screws (30) of the rope/chain stripper (29)
and remove it (leave the pin, spring and handle in place).
Pull off the gypsy (18).
DRUM SIDE
With the handle (22) release the bush (2) and pull off the drum
(3).
Clean all the parts removed to avoid corrosion and grease
(with marine grease) the shaft thread (14, 15 or 16) and the
gypsy (18) where the clutch cones rest (17 and 19).
POS. DESCRIPTION CODE
23 Pressure lever PDLVTDHC0000
24 Spring for pressure lever MMTND07G0000
25 Screw for pressure lever MSMVT07G0000
26 Plug MBSC12036A00
27 Spring MMBLBRATC000
28 Gypsy lock lever MSH10HCX0000
29 Rope/chain stripper MSN10HCXR100
30 Screw MBV0616MXCE0
31 Lock lever control PVLBBHC00000
32 Spring MM108077X000
33 Screw MBV0645MXCE0
34 Washer MBR06X000000
35 Nut MBD06MXET000
36 Studs MPB100800X00
37 Washer MBR10X000000
38 Grower MBG10X000000
39 Nut MBD10MXEN000
40 Screw MBV0516MXCE0
41A “HC” casing in plastic PDCHC2150000
41B “HC” casing in aluminium SGMCRHC21500
42 Casing gasket PGCRHC000000
43 Circlip PGPRL2552100
44 Internal circlip MBAN5220Y000
45 Bearing 7205 MBJ7205BE000
46 Worm screw MSLVT10HC000
47 Bearing 6204 MBJ620400000
48 Oil cap MNTP38T00000
49 Oil cap seal MMGUTPLHC000
50 O-ring PGR031180000
51 “HC” cable outlet PPSPHC000000
52A Electric motor 700W 12V EMF071200000
52B Electric motor 700W 24V EMF072400000
52C Electric motor 1000W 12V EMF101200000
52D Electric motor 1000W 24V EMF102400000
52E Electric motor 1500W 12V EMF151200000
52F Electric motor 1500W 24V EMF152400000
53 Key MBH050515F00
54 Sensor KNREEDCL0000
55 Red “HC” motor cable SAECC135HCR0
56 Black “HC” motor cable SAECC135HCB0
57 “HC” controlcable ECC100400L00
58 “HC” copper bracket right ECBRAHCLDR01
59 “HC” copper bracket left ECBRAHCLSR01
60A Reversing contactor unit
T6415-12 12V ERT641524000
60B Reversing contactor unit
T6415-24 24V
ERT641512000
61 Screw MBV0525MXCE0
MAINTENANCE