21
INSTALLATION
EN
BOW THRUSTER BTQ250 - BTQ300 IT EN - REV006C
PROPELLER
CONTROL PANEL
To install the control panel, consult the “TCD 1022 - TCD 10422 - TCD 1044” instruction manuals.
LOCTITE
WARNING:
on conclusion of assembly,
make sure that the propeller is exactly posi-
tioned at the central point of the tunnel.
PROPELLER FITTING
Insert the drive keys
A
onto the gearleg
B
; assemble the propellers
C
and
D
at the gearleg, fitting them onto the drive pins
A
and anchor the propellers with the self-braking nuts
E
.
The anodes
F
fit onto the nut
E
and are then anchored with the screws
G
which must be wetted with thread-locking adhesive
(such as loctite).
A
B
C
E
G
F
A
D
E
F
G