Quick BTAC Series, Руководство пользователя, Страница: 6 / 24

6
INSTALLATION AND USE MANUAL BTAC SERIES - REV000A
EN
BTAC Series
3 - Introduction
4 - Safety BTAC series
3.2 - Installation requirements
It is strongly recommended to entrust a professional with the preparation and positioning of the tunnel in the hull.
These instructions are generic and do not show by any means the details of the operations of preparing the thruster, which
falls under the competence of the shipyard. In case of problems caused by a defective installation, the installer will be held
responsible.
Despite all components and moving mechanical parts are of high quality, the correct installation of the propulsion unit is funda-
mental for a safe and efficient use of the boat, as well as of the propulsion unit itself.
Please note that the installation of such unit is an operation requiring experience and technical competence. It is recommended
to entrust the installation to competent staff and to consult the manufacturer or naval architects to fully evaluate the entity
of the work.
THE PRODUCT MUST BE DISCONNECTED FROM THE HYDRAULIC SYSTEM BEFORE INSTALLING OR PROVIDING
MAINTENANCE.
Quick® takes no responsibility regarding the inadequate connection of the users to the hydraulic system
and to the safety of itself.
4.0 - Warnings
• Quick
®
Thrusters have been designed and constructed only for nautical use.
• Do not use these appliances for other uses.
• Quick
®
shall accept no responsibility for direct or indirect damages caused by improper use of the
appliance or an improper installation.
• The Thruster is not designed to maintain loads generated in particular atmospheric conditions (storms).
• We recommend that you entrust the preparation and the positioning of the tunnel on the hull to a skilled
professional.
• These are generic instructions and do not give details of the preparatory operations for installing the tunnel,
which falls under the competence of the boatyard. The installer shall bear full responsibility for any problems
caused by defective installation of the tunnel.
• Do not install the electric motor near easily inflammable object s.