P-02
起步限速设置
Starting Speed
Limit Set
200rpm
150-800rpm
P-03
慢速起缝设置
Soft Start Set
0
0/1
0:
慢速起缝关闭；
0: Disable Soft start
1:
慢速起缝开启
;
1: Enable soft start
P-04
恢复出厂设置
Factory Reset
0
0/1
1:
恢复出厂参数
1
：
Reset the factory code.
功能调整范例：
（
Example
）
恢复出厂设置功能：
1.
按
P
键，控制面板显示
P-01
；
2.
按加速键或减速键，可调整到需要的参数号，例
如
P-04
；
3.
按
S
键，进入恢复出厂设置功能，面板显示默认值
0
；
4.
按加速键或减速键，可修改参数内
容为
1
；
5.
按
S
键保存，提示
ok
，回到显示
P-04
；
6.
按
P
键退出，进入正常使用环境。
Factory Reset Function:
1.Press P, panel displays P-01; 2.Press Accelerator or Decelerator Key, adjust
the paremeter number to P-04 for example; 3. Press S, enter into the Factory Reset function, panel
displays the default value as 0; 4.Press Accelerator or Decelerator Key, adjust the paremeter value to 1;
5.Press S to save the new value, display ok and back to P-04; 6. Press P to return to the general using
mode.
5.
故障提示
Trouble Display
故障代码
Error Code
故障名称
Error Meaning
解决方案
Solution
Er-1
过流保护
Over Current Protection
出现此种状况表明电机发生过流或欠压故障，请检查供电电压是否
正常
,
如果
220V
电控供电系统正常电压范围为
170V-250V
，如果
110V
电控供电系统正常电压范围为
100V-120V
。建议重新开启，
重开启无效可能是控制箱问题请与经销商联系，非专业人士禁止打
开控制器外壳以免触电。
If machine have this problem, it is mean the motor is over current
or under voltage problem, please check the supply voltage. The
normal supply voltage range for 220V controller is 170V-250V.The
normal supply voltage range for 110V controller is 100V-
120V .Then please restart the motor. If the machine still have this
problem, maybe the control box have some problem, please
contact with dealer. Non professionals to ban open controller
housing to avoid the electric shock.
