Quick 1412 D, Руководство пользователя

Страница: 17 / 48

17
GB
AFR 700/1000/1400W - REV012A
WARNING: make sure the electrical power to the motor
is switched off when working manually on the windlass.
Carefully remove the chain or rope from the gypsy or the
rope from the drum.
Quick ® windlasses are manufactured with materials resistant to
marine environments. In any case, any salt deposits on the outside
must be removed periodically to avoid corrosion and damage to
the equipment. The parts where salt may have built up should be
washed thoroughly with fresh water.
Once a year, the drum and the gypsy are to be taken apart as fol-
lows:
DRUM VERSION
Use the handle (1) to loosen the bush (3); pull off the drum (4) and
the top clutch cone (5); loosen the fixing screws (17 or 27) of the
rope/chain stripper (18 or 26) and remove it. Pull off the gypsy (6).
NO-DRUM VERSION
Use the handle (1) to remove the gypsy cover (2); remove the top
clutch cone (5); loosen the fixing screws (17 or 27) of the rope/chain
stripper (18 or 26) and remove it and pull off the gypsy (6).
Clean all the parts removed to avoid corrosion, and grease the shaft
thread (13 and 14) and the gypsy (6) where the clutch cones (5) rest
(use grease suitable for marine environment) .
Periodically grease the hinge pin (23) of the chain guide cover (16)
(only windlasses with aluminium bases).
Remove any oxide deposits from the terminals of the electric motor
and the contactor unit; grease them.
MAINTENANCE
16A Chain guide cover A SGMSGG100000
16B Chain guide cover white F PDGC10DW0000
16C Chain guide cover black F PDGC10DB0000
17A Screw Aries base MBV0516MXSC0
17B Screw Flair base MBV0530MXSC0
18A Rope/chain stripper Aries base MSN10VXP0000
18B Rope/chain stripper Flair base MSN10VXD0000
19 Sensor SAKREED00000
20 Screw for pressure lever MSMVT1000000
21A Black pressure lever PDLVTD100000
21B White pressure lever PDLVTD10W000
22 Spring for gypsy pressure lever MMTND1000000
23 Cover pin MSR10X000000
24A Oval base Aries SGMSC10V0000
24B Oval base white Flair SMPD10VW0000
24C Oval base black Flair SMPD10VB0000
25 Base Rider SGMSC10C0000
26 Rope/chain stripper R base MSN10CX00000
27 Screw Rider base MBV0620MXSC0
28 Gasket/A-F - shaped jig PGBSV1000000
29 Gasket/R - shaped jig PGBSC1000000
30 Stud MBP080808X00
31 Gearbox flange gasket
Top TG50
PGFLRDTG50000
32 Gearbox flange gasket
Top TG60
PGFLRDTG60000
33 Gearbox 700/1000W Quick SLMR10TG5000
34 Gearbox 1400W Quick SLMR15TG7000
35 Washer MBR08X000000
36 Spring washer MBR08XDE0000
37 Nut MBD08MXEN000
38 Washer MBR061815X00
39 Self locking nuts MBD06MXET000
40 O-ring motorgearbox
700/1000/1400W
PGR023000000
41 Key 5x5x15 MBH050515F00
42A Electric motor 700W 12V EMF071200000
42B Electric motor 700W 24V EMF072400000
42C Electric motor 1000W 12V EMF101200000
42D Electric motor 1000W 24V EMF102400000
42E Electric motor 1400W 12V EMF141200000
42F Electric motor 1400W 24V EMF142400000
43A Watertight 700W PCCCPM070000
43B Watertight 1000/1400W PCCCPM100000
44 Grommet PCGPMMR00000
45 Terminal board cover PCCPPMMR0000
46 Screw MBV02213AXSC
47 Bottom gasket PGGPMFN00000
48 Bottom protec cover PCCPPMFN0000
49 Cable outlet PPM20B000000
50 O-ring 3125 PGR031650000