quhwa VP-700A, Инструкция по эксплуатации

Страница: 10 / 11

first ID card will be adding card, and the second will be delete card.
13. The kit can unlock the door with ID card, and user can install ID card
function accordingly.
Fourthly , turn off the power, and let the jumper wire to be RUN condition. The
8
.
Accessories
■
One indoor monitor
■
One outdoor camera
■
One adapter
■
One bracket for indoor monitor
■
15M cable
■
Screws
9
.
Notices
1. Do not install the indoor monitor at high temperature, high humidity place or
near TV.
2. No touching the monitor screen with wet hands.
3. Please use only soft cloth to clean the monitor screen or camera in order to
get a clear image. Please do not use dishwashing liquid, lacquer diluent, or
corrosive liquid to clean.
4. Please avoid throwing or hitting the units.
5. Image could be illegible if the camera is shined by strong light.
6. If you use internal wireless communication systems, image may be fuzzy
because of interference from radio waves.
■
ID card: user card, adding card, delete card
deleted successfully.
12. The adding card and delete card are set well already. If the user loses the
adding card or delete card, he or she can re-program a new setting by doing
the following steps:
Secondly , please turn off the power, and let the ID unlock PCB jumper wire to
be SET condition.
Thirdly , turn on the power, and use two ID card to touch the ID card touching
zone of the outdoor station accordingly. If there is a long ring sound after the
second ID card touching, the re-setting is successful.
Firstly , open the back cover of outdoor station.
Secondly , use the user card to touch the same area.
Thirdly , use the delete card to touch the same area. Then the user card is