
3
Instruction version: 4
SP2112 :
Home is where you tow it front cover full instructions
Storage
To help keep your product looking newer for longer and prolong the life and use of the product,
we recommend that the product is kept in a storage box or similar when not in use.
If the product is not going to be used for an extended period (such as a winter period) we
recommend that it is carefully folded away and stored in a clean, dry and free from damp
location.
Care and Cleaning Instructions
Never use and harsh or abrasive cleaners or brushes when cleaning this product as the fabric
may be damaged when doing so.
Never fold and put the product away when wet as this can trap water in the product, which can
lead to mould and mildew build up.
• First allow the product to fully dry.
• Then using a soft brush to avoid damage, brush any loose dirt off the fabric.
• Once this has been done we recommend using a dedicated fabric cleaner for the fabric, if one
is not available simply warm soapy water. After it has been cleaned, rinse with clean water to
make sure there's no soap or cleaner left inside the fabric. Once rinsed allow the product to dry
naturally before folding away and storing.
Attaching the Cover
• Take the cover out of its carry bag and locate the top left corner. (TIP: Use the printed logo on
the front to ensure you have the cover the right way around)
• Feed the first beading strip on the left hand side of the cover into the awning rail on the left.
• Then feed the first beading on the right hand side of the cover into the awning rail on the right.
• Repeat this for all of the beading strips until the caravan cover is in place.
• Then tighten the straps on the left and right hand side of the cover. These should be pulled
tight and the excess material is folded up behind the straps
to protect your caravan.
• Then tie each strap as shown in the image to the side. This
knot should be right behind the strap buckle adjustment to
help lock the buckle in place to ensure it cannot become
loose during travel.
• Ensure the lights are on and working before moving away.