4
Template version: 3
F1323 :
Naples Pro relax XL full instructions
image 1
image 3
image 4
image 5
image 2
Folding, adjusting the recline and unfolding.
• Take the chair from the bag and stand the chair upright as shown in image 1. Ensure that the
arms are unlocked (as shown in image 6). Standing at the side of the chair with one hand of
the back rest and one hand on the arm rest push these apart by pushing in opposite directions.
If the chair does not want to open as shown, then the arms of the chair may be pushed too far
back and inhibiting the chair from opening. If this is the case, release the arms by moving them
forward and then try opening the chair again.
• When the chair is open with the legs fully apart you can pull the back rest up into the upright
position and lock the arms into position (as shown in the image 7).
• Now slide the side table from under the chair (image 3) and locate onto the locking pin on the
side of the chair (image 4)
• To adjust the recline, set the locks to unlocked (as shown in the image 6), sit in the chair, place
your legs on the bottom bar of the chair and push back also using your legs to pull up (as
shown in image 5).
• When folding the chair make sure you unclip the side table and slide it back under the chair first,
then unlock the chair (as shown in image 6), pull arm on the arms rest and pull the back of the
chair forward until the chair is closed, you might then need to fully close the chair by pushing
the frame together. Once done lock the legs (as shown in image 7).
You can also follow this process using the QR code (video link) on the next page or going directly
to the URL :
https://youtu.be/ztAdyTgmKxY
