Page: 5
RDF4845
SpeedFit Brean instructions
Unfolding
• The brean table folds into its own carry case, so first, unlock any of the table top locks that are in
place. There are 4 in total, but only the end two lock it in place, so check each one.
• Once all are unlocked open the table as shown in image 2.
• Unfold the table until it is fully open and then use the tabletop locks to lock the top in place as shown
in image 3
• Then unfold each leg and ensure the leg locks are in place and locked as shown in image 4.
• Ensure that the legs are not unlocked as shown in image 5.
• Take each bottom leg section out from under the table and simply push into the lower leg.
• The table is now ready to use.
•
Adjusting
• You can adjust each leg independently to help ensure the table is level even on uneven ground.
• There is a screw foot at the bottom of each leg which can be turned clockwise or anti-clockwise to
lower and higher the table to allow for uneven ground.
Folding
• Turn the table upside down.
• Pull each lower leg section out of the upper leg and click into position on the underside of the table.
• Push the metal locking bracket in to release the leg. When the leg is locked in place it will look like
image 4, when it is unlocked (ready to be folded away) it will look like image 5.
• Then push each leg into the bottom of the table and once done it will look like image 2.
• Then unlock the centre tabletop lock(s) - remember there is one on each side. This will then allow you
to fold the table top in half to create the carry case.
• Finally lock the carry case closed by locking the two end table top locks in place as shown in image 1.
Folding and Unfolding
Details on how to use your product.
