CARE AND MAINTENANCE
13
GENERAL
No audio.
• Make sure the MUTE inclicator on the front
panel is off.
• Make sure the speakers are turned on.
• Check the connections.
• Check the power cord connection. No audio
from one channel.
• Adjust the balance control.
• Check the speaker wire connection or connect-
ing cable.
• Noise when the TV is turned on. TheTV is to
close to the audio system.
• Check the connection between the receiver and
the speaker. The sound does not match the video.
• Press the function button for the video source.
CLEANING THE EXTERIOR
Disconnect the system from AC power before clean
-
ing the exterior of the system with a soft dust cloth.
TROUBLESHOOTING TIPS
RECEIVER/TUNER OPERA
TION
STEREO indicator is off.
• Adjust the antenna.
• The signal is too weak. Connect an external
antenna
• The signal is Mono
• Severe hum or noise
• The signal is too weak. Connect an external
antenna
• Adjust the antenna
REMOTE CONTROL OPERA
TION
The remote control does not operate the unit
• Another function is selected on the remote. Press
the correct function button
• No batteries installed. Install the batteries before
attempting to operate the remote. Be sure to
match the + and - ends of each battery to the
symbols shown in the remote battery compart-
ment
• The batteries are exhausted. Replace all batteries
• The remote is not pointed at the remote control
sensor on the main unit or there is an obstacle
between the remote and the main unit
• The remote control is to far from the main unit
• Move closer
