Quest Engineering Q-Matrix 88, Руководство пользователя, Страница: 19 / 28

Q-Matrix 88
User Manual
User Manual Q-Tech Commercial Series Q-Matrix 88
17
1 Master Remote Paging Console
2 Extension Keypad 1
3 Extension Keypad 2
4 Extension Keypad 3
5 Gooseneck Microphone
6 Power Indicator
The LED indicator light will appear blue when the
power switch is in the on position. The light will
turn off when the power switch is placed at off
position.
7 Output Level Meter
A 5 position LED output level meter displays the
output level status, (green, green, green, amber,
red)
8 Talk Indicator
The LED will turn blue when the talk button is
pushed, and will turn off when talk button is
released.
9 Talk Button
After selecting a zone, an announcement can be
made when the talk button is pressed and the
indicator is illuminated. Without zone selection,
an announcement cannot be made, even when
the talk button is pushed. In this instance, the
indicator light will flash and turn off.
10 All Call Button
The All Call Button can be selected when all
zones are to be selected. If more than one
console is being used, priority operates on this
is on a “first in first served” basis. The All Call
indicator will be turned off when the All Call
button is pushed and the other paging consoles
are in use.
The busy indicator will turn amber and flash if the
other console is paging into any particular zone.
In this case, it may be possible to page zones
that are not showing up as busy.
11 All Call Indicator
The LED will be show blue when the All Call
button is pushed, which will turn off when the All
Call button is released.
12 Zone Label
13 Zone Indicator
Dual colour indicator LEDs are used to display
the zone status. The indicator will be blue under
paging status and amber under busy status.
14 Zone Select Button
Push the zone select button to page a zone. After
the button is selected, the zone indicator will
slowly flash if the com ports are busy and change
to amber.
Communication is only available if the blue LED
shows