background image

1-866-933-7486 

Quest 

Powe

rDry 1300 

Installation, Operation and Maintenance Instructions

  

2

www.QuestOnTheJob.com

[email protected]

Quest PowerDry 1300 

Installation, Operation and Maintenance Instructions

  

Table of Contents

Safety Precautions ............................................. 3 

1.  Safety Certifications

 ....................................... 4 

2.  Specifications 

 ............................................... 4 

3. Handle Installation ........................................ 4
4.   Operation .....................................................  4 
  4.1 Transporting ............................................ 5
  4.2 Electrical Requirements ........................... 5
  4.3 Condensate Removal ............................... 5
  4.4 Ducting ................................................... 5
  4.6 POWER Button ........................................ 5
  4.7 PURGE Button ........................................ 5
  4.8 Hour Meter ............................................. 6
  4.9 HOURS Button ....................................... 6
  4.10 DEFROST Light ..................................... 6
5. Maintenance ................................................. 6
  5.1 Air Filter .................................................. 6
  5.2 Storage .................................................... 6
6  . Service .......................................................... 7
  6.1 Technical Description .............................. 7
  6.2 Troubleshooting ....................................... 7
  6.3 Air Mover ................................................ 9
  6.4 Thermistor ............................................... 9
  6.5 Condensate Pump ................................... 9
  6.6 Float Safety Switch ................................ 10
7. Options and Accessories ............................. 10
8. Wiring Diagram .......................................... 11
9. Service Parts ................................................ 12
Warranty ......................................................... 13

quest

quest

Содержание PowerDry 1300














Отзывы: