Quest IQ Compressor Wall OMM
2
September 2020
General Information
Document Scope
This manual provides operation and maintenance information about the Quest IQ Compressor Wall HVAC system
and its operation.
Additional information regarding installation, maintenance, and equipment commissioning and auxiliary devices
(dry cooler, communication interfaces, etc.) is provided with the HVAC system and can also be obtained from the
manufacturer.
Contact Us
Quest
For immediate assistance:
Phone: 1-833-327-2447 (Canada), 1-877-420-1330 (USA)
For unit commissioning, miscellaneous inquirieis, parts requests and warranty:
Email:
Operating Safety (Warnings, Cautions, and Notes)
FOR YOUR SAFETY: READ BEFORE PERFORMING ANY OPERATIONS, MAINTENANCE OR SERVICE TASKS!
Only qualified technicians should install, operate, maintain or service mechanical equipment
including current dehumidification system.
Read this manual before performing any tasks to familiarize yourself with the equipment as well
as with any potential hazards. Always exercise caution!
Beware of electrical power and high electrical voltage!
•
Follow proper safety procedures
–
lockout, tagout, and other respective procedures
•
Failure to follow safety procedures can result in serious injury or death
Beware of moving parts and hot surfaces!
•
Make sure to stop all moving parts (fans, blowers, etc.) before accessing the equipment
’
s
internal compartments
•
Be aware of hot surfaces (hot refrigeration, space heating pipes, coils, heaters, etc.)
Beware of high pressures and chemicals!
•
HVAC systems, equipped with compressors, contain refrigerant under high pressure; oil is
also contained in the compressor and refrigeration circuit(s)
•
Some HVAC systems may also contain other liquids such as glycol mixtures
